Beschrijving

AC NOISES Ama (reverb w/ oscillator + bit crusher) effect pedal is a spring reverb with an analog oscillation + bit crusher an it works perfectly with guitar, bass, synth and basically every kind of instrument (human voice included). If you consider yourself as a “purist”, MAYBE the AMA could offers too much atypical shades for your idea of spring reverb pedal, but if you’re always excited to create new soundscapes, atmospheres and solutions, you could definitely fall in love with this first ambient-related AC noises pedal.When the AMA is turned on (bypass: upper white led engaged) with both the bit crusher and the oscillator turned off (toggle switch: OFF position – OSC switch: upper white led not engaged), the pedal works as a spring reverb with a maximum of 2,85” decay’s length. In this case, you can control its two dedicated parameters through the related knobs MIX and REVERB.MIXThe MIX knob controls the balance between the dry and the wet signal.Turn itclockwise and the reverberated portion of your original signal will increase.Turn it counterclockwise and and your original signal will be directed to the output in its entirety.REVERBThe REVERB knob controls the amount of reverb (and its relative decay’s length).More you’ll turn it clockwise, bigger will be the reverb size (and longer will be the decay).Turn it counterclockwise and the amount of reverb will decrease.EXTREME REVERB SETTINGSTurning fully counterclockwise both the MIX and the REVERB knobs, you’ll have no reverb at all.In case you’ll set the REVERB knob up to 8 o’clock, you’ll notice a reverberated portion of the signal (even if the MIX knob is set at its minimum).If you turn both knobs fully clockwise you’ll hear just the reverberated portion of your original signal. In this case, you’ll notice a sort of very fast swell-reverb effect, which could be very interesting to create atypical soundscapes.OSCIf you turn the oscillator on (OSC switch: upper white led engaged), you’ll add a fully analog oscillation which will be generated immediately after each note you’ll decide to play. That means that when you’ll leave the note/s, the oscillation will be noticed as a feedback mixed to the reverb decay, creating a gently modulated waveform and making a cinematic-style soundscape, especially with the reverb knob at his maximum. In fact, the amount of oscillation has been calibrated during the development process of the AMA’s circuit to make something simple to understand and to deal with for every musician out there: more you’ll turn the reverb knob clockwise, more the oscillation will be audible.BIT CRUSHERSpeaking about the AMA’s internal signal chain, the bit crusher is located AFTER the reverb. Turning it on (toggle switch: ON position) it will be added to your tone and it can be controlled by its two parameters: RESOLUTION and SAMPLE RATE.RESOLUTIONIt controls the amount of the oscillation pulse (we’re speaking about the internal one of the bit crusher, not the switchable one). Turning it clockwise, pulses will be wider and the signal will be noticed as less crushed (and viceversa of course).SAMPLE RATEIt controls the bit crusher internal oscillation frequency.Turning it clockwise, the oscillation will be more focused on high frequency and the bit crushed sound in general will be noticed as brighter.